Across provincial general hospitals and university teaching facilities in Zambia, orthopedic admissions for femoral shaft fractures and pediatric trauma require immediate, non-invasive immobilization prior to definitive surgical fixation or casting. The Zambia Medicines and Medical Supplies Agency (ZAMMSA) relies on disposable skin traction kits (Buck's extension) to manage acute muscle spasm, alleviate neurovascular tension, and prevent limb shortening without skin tears.
Across provincial general hospitals and university teaching facilities in Zambia, orthopedic admissions for femoral shaft fractures and pediatric trauma require immediate, non-invasive immobilization.
A medical skin traction kit comprises adhesive or non-adhesive side extension straps, an anatomical foot spreader plate with integrated nylon cord, and an elastic retaining bandage. Adhesive kits utilize porous zinc oxide mass coated on woven cotton backing to deliver high shear resistance (supporting 5–7 kg loads without slipping). Non-adhesive kits utilize soft, high-friction polyurethane foam lined with elastic wraps to protect fragile geriatric or pediatric skin from shearing and blistering.
| Specification | Adhesive Skin Traction Kit | Non-Adhesive (Skin-Safe) Kit | ZAMMSA Clinical Application |
|---|---|---|---|
| Skin Anchorage | Direct porous zinc oxide adhesive coating | Foam contact lined with high-friction elastic wrap | Adhesive preferred for closed fracture pre-op traction in adults |
| Max Traction Force | Up to 5.5 kg (12 lbs) continuous load | Up to 3.0 kg (6.6 lbs) continuous load | Non-adhesive mandatory for geriatric & fragile pediatric skin |
| Skin Shear Resistance | High shear hold tested to ASTM D3330 | Moderate (depends on wrap tension) | Prevents longitudinal slippage during muscle spasms |
| Pressure Sore Risk | Low if foam positioned over malleoli | Extremely low; zero adhesive contact | Crucial for malnutrition and burn-trauma cases |
| Shelf Life in Humid Tropics | 36 months in sealed moisture-barrier pouch | 60 months in moisture-barrier pouch | Maintains adhesion at 35°C ambient warehouse temps |
In tropical Sub-Saharan distribution networks, standard acrylic adhesives either liquefy under heat or turn brittle, tearing patient epidermis on removal. Medical-grade porous zinc oxide adhesive breathes, stays tacky at 38°C, and releases cleanly with zero skin denudation.
Manshav Impex skin traction kits incorporate high-density closed-cell polyurethane foam pads specifically contoured to shield both the medial and lateral malleoli. The spreader plate is stamped from deburred, powder-coated rigid alloy with a frictionless central eyelet to prevent traction cord fraying under continuous dynamic oscillations.
Our adult adhesive skin traction kits are rated for continuous traction loads up to 5.5 kg (12 lbs), maintaining adhesion integrity for up to 7 days without slippage.
Yes. Each kit is a complete clinical pack containing the traction strap assembly with padded foam, spreader plate with pre-threaded braided nylon cord, and an elastic retaining wrap.
Conservative fracture management and postoperative immobilization across Tanzania have shifted rapidly away from traditional Plaster of Paris (POP) bandages.
The ongoing modernization and construction of provincial general hospitals across Angola have generated sustained demand for high-durability patient ward furniture.
Across Kenya's 47 counties, Level 4 and Level 5 hospitals are modernizing wards, requiring rugged, infection-resistant bedside storage furniture.