Export Guide

Nitrile Gloves Bulk Price: What Moves It and How to Compare Supplier Quotes

A distributor in Mombasa once showed us three nitrile glove quotes that differed by a fifth. Once we put weight, thickness, AQL and box count side by side, the cheapest was the most expensive per usable glove.

Nitrile Gloves Bulk Price: What Moves It and How to Compare Supplier Quotes
In short

Two nitrile glove quotes with the same box price can be very different products. This guide is for importers and distributors in markets such as Kenya, Nigeria, the UAE and Saudi Arabia: what actually moves the bulk price of nitrile gloves, how to line quotes up like for like, and which checks keep a low price from turning into a costly container.

Full specifications, packing and the minimum order are on our disposable nitrile examination gloves product page. This guide is written for importers and medical distributors who buy nitrile examination gloves by the container for hospitals, clinics, labs and pharmacies in markets such as Kenya, Nigeria, Tanzania, the UAE and Saudi Arabia, and who need to compare bulk quotes from different suppliers fairly.

What decides the bulk price of nitrile gloves?

The bulk price of nitrile gloves is decided mainly by glove weight (how much nitrile is in each glove), the price of nitrile latex at the time of production, the inspection level (AQL), the packing and the order volume. Freight, Incoterm and payment terms then move the landed cost. To compare suppliers, ask every one to quote the same weight, thickness, AQL, box count and Incoterm, then compare the cost per 1,000 gloves delivered to your port.

The cost drivers behind a nitrile glove quote

Most of the spread between quotes comes from a few specification choices that are easy to miss on a one-line price. The table shows each driver, why it moves the price and what to ask for in writing.

Price driverWhy it moves the priceWhat to ask the supplier
Glove weight (g per glove, size M)Nitrile is the largest raw-material cost; a lighter glove uses lessAverage weight per glove for size M, and the tolerance
Thickness at palm and fingertipThinner film uses less material and tears more easilySingle-wall thickness in mm at palm and fingertip, measured to the standard
AQL for pinholesTighter AQL means more rejects and more testingAQL level stated on the test report (e.g. 1.5), not only on the box
Standard tested toTesting to EN 455 or ASTM D6319 adds cost and paperworkTest reports from a named lab for the current production
Gloves per box100 and 200 per box are both sold; a box price hides the countPieces per box and boxes per carton (ours: 100 per box, 10 boxes per carton)
Colour and textureSpecial colours, black or longer cuffs add costColour and fingertip texture written into the quotation
Order volumeLonger runs of one size and colour lower the unit costPrice breaks by quantity and the size split assumed
Incoterm and portFOB, CIF and DAP put freight and insurance in different placesThe same Incoterm and destination port from every supplier

How to compare nitrile glove quotes like for like

Put every quote on one sheet and convert it to the same unit before you look at the price. A box price, a carton price and a price per 1,000 pieces cannot be compared until they are turned into one number.

  1. Convert every price to cost per 1,000 gloves, using the pieces per box each supplier states.
  2. Write the weight per glove and thickness next to each price. A glove that is 15–20% lighter will usually be cheaper for that reason alone.
  3. Check that every quote names the same AQL and standard, with a test report rather than a printed claim on the box.
  4. Bring every quote to the same Incoterm and port, for example CIF Mombasa or CIF Jebel Ali, so freight is not hidden in one price and missing from another.
  5. Add the costs you pay at destination: duty, clearing, registration fees and inland transport. Confirm current duty rates with your customs broker.
  6. Compare lead time and validity: a low price valid for seven days is worth less than a fair price held for thirty.
  7. Check payment terms. An advance payment ties up your cash for the whole production and sea transit.
At-a-glance checklist: Nitrile Gloves Bulk Price: What Moves It and How to Compare Supplier Quotes
The key checks from this guide at a glance.
Buyer tip

Weigh the samples. Take ten size-M gloves from a sealed box, weigh them on a kitchen scale that reads to 0.1 g and divide by ten. Do the same for every supplier's sample. It takes five minutes and tells you more about the price difference than any data sheet. Then ask that the production lot matches the sample weight within a stated tolerance, and write it into the purchase order.

When a low price per box ends up costing more

A low quote is not always a bad one; nitrile prices do move with raw material and capacity. But some savings come straight out of the glove, and the cost shows up later in your market.

  • Tearing when donning. A thin glove that splits at the cuff means two gloves used for one task. Your customer's real cost per examination doubles, and the complaint comes back to you.
  • Pinhole rejects at inspection. If a pre-shipment inspection finds the AQL is not met, the container is delayed or rejected and the cheaper price has bought you nothing.
  • Short counts. Boxes labelled 100 that hold 95 cut five percent off your stock without changing the price.
  • Registration trouble. If the test reports or certificates do not match the product shipped, a registration with the Pharmacy and Poisons Board in Kenya, NAFDAC in Nigeria or the SFDA in Saudi Arabia can stall. Check current requirements with the regulator.
  • Wrong size split. A price quoted on mostly size M will not hold if your market needs more L and XL. Quote on your real size split.
Nitrile is sold by the box, but it is paid for by the gram.
See our nitrile examination gloves: powder-free, latex-free, sizes XS to XL, tested to EN 455 and ASTM D6319, packed 100 per box.
View nitrile gloves

Documents to ask for with a bulk nitrile glove quote

A price is only as good as the papers behind it. Ask for these with the quotation, so you can check them before you pay a deposit and before your registration file is built.

DocumentWhat it should show
Product specification sheetWeight, thickness, length, tensile strength, sizes and colours
Test reportsResults to EN 455 or ASTM D6319, AQL for pinholes, from a named lab
Quality system certificateISO 13485 for the site that makes the gloves, with the scope covering gloves
Packing list templatePieces per box, boxes per carton, carton size and gross weight
Commercial invoice detailsHS code (we use 4015.19 for nitrile examination gloves), country of origin, Incoterm
Certificate of originNeeded for duty claims or tenders in many markets; ask which form your market accepts

Order volume, packing and container planning

Our minimum order for nitrile examination gloves is 100,000 pieces, which is 100 master cartons of 1,000 gloves each (10 boxes of 100). Lead time is normally 12 to 18 days after the order is confirmed. Gloves are light for their volume, so a container usually fills by space before it fills by weight; ask your supplier how many cartons fit a 20-foot and a 40-foot container for the carton size they quote, and compare the freight cost per 1,000 gloves rather than per container.

Distributors who serve several markets often split one container across sizes and colours. That is fine, but quote it that way: a mixed container priced as if it were a single size will not hold at order confirmation.

Send us your quantity, size split, colour and delivery port (Mombasa, Lagos Apapa, Dar es Salaam, Jebel Ali or Jeddah), and we will quote per 1,000 gloves with the test reports attached.
Request a nitrile glove quote
🏭 Export Sourcing DeskIndian Manufacturer & Exporter — Vetted Factory Network
Disposable Nitrile Examination Gloves (Powder-Free, Blue/Violet) manufacturer India

Nitrile examination gloves manufacturer & exporter in India

100% synthetic nitrile medical examination gloves — latex-free, powder-free, micro-textured fingertips with superior chemical and puncture resistance for hospitals, clinics, and laboratories. Container consignments dispatched from Port Mundra & Port Nhava Sheva, with certificates and test reports shared with every quotation.

Made to CE MDRMade to ISO 13485Made to EN 455Made to ASTM D6319MOQ: 100,000 pcs

Frequently asked questions

What is the bulk price of nitrile gloves?

It changes with glove weight, nitrile raw-material cost, AQL, packing, volume and freight, so we do not publish a fixed price. Request a current quotation and compare it per 1,000 gloves at the same weight, AQL and Incoterm.

Why are some nitrile gloves cheaper than others?

Usually because they are lighter or thinner, tested to a looser AQL, packed with fewer pieces per box or quoted on a different Incoterm. Weigh the samples and compare the test reports before comparing prices.

How many nitrile gloves are in a box and a carton?

Our nitrile examination gloves are packed 100 per dispenser box and 10 boxes per master carton, so 1,000 gloves per carton.

What is the minimum order for nitrile gloves from Manshav Impex?

The minimum order is 100,000 pieces, with a normal lead time of 12 to 18 days after order confirmation.

What HS code is used for nitrile examination gloves?

We ship nitrile examination gloves under HS 4015.19. Your customs broker should confirm the national tariff line and current duty rate in your country.

Sharmil Mangukiya (Founder & MD)

Sharmil Mangukiya is the founder and managing director of Manshav Impex, an Indian manufacturer & exporter of medical disposables serving importers, distributors, hospitals and governments in 48+ countries since 2019.

Chat with us